The Initio INIC-940, a single-chip PCI to UltraSCSI host adapter, provides a complete SCSI solution for PCI motherboard applications. The Initio INIC-940 supports the latest UltraSCSI standards, transferring data at up to 20 MBytes/second and takes advantage of the 133 MBytes/second burst rate of the PCI bus to provide superb I/O performance. INIC-940 supports a wide range of popular operating systems and has been extensively tested over a large matrix of peripherals and systems. In addition to the 8-bit UltraSCSI interface and 32-bit PCI 2.1 compliant interface, INIC-940 has a memory interface to access SEEPROM devices. INIC-940 has a SCSI protocol processor which handles all of the SCSI bus phases. The chip also provides support for external SCSI bus terminators and SCAM level 1. INIC-940 has an on chip advanced SCSI I/O cell which is capable of adjusting the slew rate on the SCSI signals to ensure signal integrity over different cabling environments. INIC-940 is available in a 160-pin PQFP.
Features | Additional Features | Datasheet
|
SCSI Interface:
- Dedicated SCSI processor for handling SCSI operations
- SCSI transfer rates from 5 MB/s Asynchronous SCSI to 20 MB/s Synchronous UltraSCSI
- Supports both auto and programmable SCSI termination
- Supports Command Tag Queuing and Disconnect/Reconnect
- Advanced SCSI I/O cell capable of adjusting the SCSI signal slew rate
PCI 32-bit Interface:
- PCI 2.1 Compliant, burst transfer rates of 133 MB/s
- Built-in S/G execution engine
|
- Support for SEEPROM and FLASH
- Plug & Play, allows user to change configuration without any need for jumpers
- On-chip power managment features to decrease the power consumption
- Full driver support for all of the major Operating Systems
- Provides ASPI manager for DOS, Windows and Netware
- BIOS support for DOS and Windows application without driver involvement
|
TECHNICAL SPECIFICATIONS |
|
OS COMPATABILITY |
Microsoft Windows 3.1x, Windows 95, Window 98, Windows NT 4.0, MS-DOS 6.x, Novell NetWare 3.1 & 4.11, OS/2 2.1, OS/2 Warp 3.0/4.0, SCO Unix 3.24-5.0x, SCO UnixWare 2.1/7.x, Linux |
|
|
HOST BUS |
PCI local bus, rev 2.1 |
|
|
HOST INTERFACE |
32-bit bus master DMA |
|
|
HOST BUS DATA TRANSFER RATE |
Up to 133 MB/sec burst rate |
|
|
SCSI BUS TRANSFER RATE |
20 MB/sec in UltraSCSI Mode |
|
|
DEVICE SUPPORT |
Connect up to 15 devices* using non-Ultra2 |
|
DOCUMENTS IN PDF FORMAT  |
|
DATA SHEET |
|
|
*Actual number of SCSI devices may be limited. Please review the SCSI-3 specification for further information. |
|
